WARM: IKEA LCD Wall mount $19

Originally Posted by jason9945

It looks like it would almost fit. I'm taking a trip to ikea with my measuring tape anyway.

I have a jerker desk but the single level one. I just quickly measured the space between the holes on the desk brackets and its approx. 45mm while the screw holes on the wall mount is approx 25mm. It won't fit without you drilling your own holes into it.

Originally Posted by ainsane

I have a jerker desk but the single level one. I just quickly measured the space between the holes on the desk brackets and its approx. 45mm while the screw holes on the wall mount is approx 25mm. It won't fit without you drilling your own holes into it.

Thanks,
Its hard to tell the dimensions from the pics

I just picked this up for my Dell 2405. Awesome for 20 bux, but youve gotta really CRANK on the up/down till bolt to keep it frop dropping toward the ground due to gravity. I honestly dont think this would support at 30" lcd.

Just bought one from Ikea today in Coquitlam. It will be for me 2407fpw. Will install it next week and post some pics.

this sounds like a good deal to me!! i think i saw some wall mounts for tvs at best buy for over $200!!

Originally Posted by PrincessD

this sounds like a good deal to me!! i think i saw some wall mounts for tvs at best buy for over $200!!

That's like saying a KIA is a good idea because you saw a $100,000 BMW at their dealership.

Any pictures of completed and mounted LCDS?

Well I actually got around to 'trying' to install the mount today on my 2407fpw.

Yes 'trying'.

The one thing with 'ikea' products is that they are GREATLY mass produced, ie: cheap prices for us.

The 4 slots for the 'vesa' mount are 'punched' out and not machined out. Most good mounts out there will be machined, to cut out to a great deal of accuracy.

So, although 3 of the slots line up for the 3 screw holes, 1 doesn't.

Now I say the above, because I run a CNC Machine shop with my dad, so I know whats really wrong. I'll probably go back to ikea, and compare the one with another one, to see if there is a difference. Otherwise I'll probably just take the mount to my shop and mill the slots a little wider.

For the price, these are great mounts. Made pretty strong.