should i go dual channel ddr support? ...

hi im running a althon xp 2500+ on a asus a7n8x-x mother board with 1.5gig ddr pc3200 ram ...that's 3 stick of 512 ddr pc3200 ram

...unfortunately my mother board doesn't support dual channel ddr....so im thinking of upgrading to a motherboard that does but right now im tight on budget

so my question is ...is it worth it? does it make any significant difference that shows if i were to use a mother board with dual channel ddr support?

if not i rather just stick with what i have and save the cash for something else

here is my system specs

Athon Xp 2500
Asus A7N8X-X mobo
1.5gig DDR 3200 / 400mhz
geforce 6600GT 128mb
120gig hd
windows xp sp2

so what you guys think should i upgrade the mobo? ...meaning to do it just for better gaming experience

The answer is no. Keep your system the way it is now and make the big leap later.

With 1.5GB RAM already in place, it appears the CPU will be the first bottleneck. Unforunately, there is very little headroom for socket-A CPU upgrade from your 2500+ and the cost nowadays is inflated somewhat.

No.

Dual channel would not increase your performance all that much. It is better to wait until you have more money and get a mobo and cpu together.

Dual channel has next to no performance gains for AMDs.

The only CPUs that it's useful for are Athalon64 and P4.

And even then it's not a huge speed boost. Don't go out of your way to upgrade to dual channel, you won't notice the difference.

Save your cash for a real upgrade. i.e. A64 S939

cool thanks alot guys

?!?!?!
Didn't we have this discussion before?? Dual channel *is* the way to go. You'll get 20-25% system performance gains, period. That's huge. Why else was this technology so widely adopted, preferred, and accepted? When this technology was first introduced, it made AMD mobos SO popular and faster forcing all Intel boards to eventually adopt this technology as well. Nevermind what anyone else tells you otherwise. While you will get little to no gains in real world benchmarks, who really cares about that anyways? Most RFDers are not limited to just real world benchmarks.

And your mobo is an NF2 chipset mobo. It already does support dual channel. Just stick two similar bars of 512's in the blue slots and you're set. You cannot use all 3 dimms in conjunction with dual channel. Then stick your remaining bar into another rig or sell it. I would even say dual channel is faster than single channel with more ram - but of course it depends what you will be using it for. If you only do typical apps and surfing, then you won't see any benefits. Anything beyond this including games, you WILL see gains.

EDIT: just found out your mobo is actually not dual channel. read below posts.

Originally Posted by Cafe_333

And your mobo is an NF2 chipset mobo. It already does support dual channel.

Asus A7N8X-X uses the nForce2 400 chipset (not Ultra 400), it's single-channel only. I'll have to side with the others here, a mobo upgrade isn't worthwhile just for the sake of dual-channel...make a bigger leap down the road.

ah... i just saw nf2 but didn't read closely into it. so it actually is a single channel mobo. My opinion was based on the presumption that he could go dual right away. Well in light of this, I do agree that making a big leap later is the better option, especially a mobo upgrade just for the sake of dual channel, is definately not worth it. I do stand by that dual channel is superior and faster than single. Definately something to consider for the future.

Originally Posted by Cafe_333

?!?!?!
Didn't we have this discussion before?? Dual channel *is* the way to go. You'll get 20-25% system performance gains, period. That's huge.

The performance gains are not that high. Unless you're talking marketing hype.

And it's been proven before that AMD(with the exceptino of the 64) can't take advantage of the increased memory bandwidth. Who cares if the memory is faster if you can't use it.

It's like redlining your car between stoplights.l You'll get there first, but the car beside you doing the speed limit will still catch you at every light.

Originally Posted by Cafe_333

?!?!?!
Didn't we have this discussion before?? Dual channel *is* the way to go. You'll get 20-25% system performance gains, period. That's huge. Why else was this technology so widely adopted, preferred, and accepted? When this technology was first introduced, it made AMD mobos SO popular and faster forcing all Intel boards to eventually adopt this technology as well. Nevermind what anyone else tells you otherwise. While you will get little to no gains in real world benchmarks, who really cares about that anyways? Most RFDers are not limited to just real world benchmarks.

And your mobo is an NF2 chipset mobo. It already does support dual channel. Just stick two similar bars of 512's in the blue slots and you're set. You cannot use all 3 dimms in conjunction with dual channel. Then stick your remaining bar into another rig or sell it. I would even say dual channel is faster than single channel with more ram - but of course it depends what you will be using it for. If you only do typical apps and surfing, then you won't see any benefits. Anything beyond this including games, you WILL see gains.

LOL...I don't think you said one thing right in that entire post!

- Performance gains are very minimal. The only area DC helped on NF2 was with the IGP. NF2 just can not make use of the extra bandwidth. Intel is starved for bandwidth.
- As already mentioned, the -X left off DC support. Why? Saves money and really doesn't have a benefit. DC doesn't help the S939 platform much either, which is why S754's performed similar. DC on AMD's is more of a marketing gimick then anything.
- You are also wrong about not being able to use DC with all 3 512MB sticks. If he had a DC board, he would be running DC...it just would not be perfectly matched, but no performance would be lost.

Would you like to try again?

Like i said, the gains are minimal to none in real world benchmarks. This same point was brought up to my attention in the last discussion too. So with that respect you guys are right - this I have not disputed, so why are you all picking a fight with me on that????? but beyond this there ARE gains - wherein lies my point. No one, I repeat no one, can argue that you get absolutely no gains going dual channel. You *cannot* tell me that going dual channel does nothing. You *will* get gains any way you want to look at it - it's just a question of wether or not you can make use of the gains it's situated for. And my point about not being able to use all 3 sticks was in regards to an NF2 dc mobo - so get your facts straight. I am correct in that statement as well.

Dual channel is a proven technology. Not just marketing hype. No manufacturer would put forth a technology that didn't work. And your analogy with the cars seems contradictory to your position. Doesn't getting from point A to point B faster just glorifies my point?

Originally Posted by Cafe_333

And my point about not being able to use all 3 sticks was in regards to an NF2 mobo - so get your facts straight. I am correct in that statement as well.

I was talking about NF2 mobos...and you are still wrong. So, get your facts straight!

I never said there were no gains. I said they were very minimal.
You said "You'll get 20-25% system performance gains, period. " Please note the "period".
Please show me where you get these amazing gains...I was not participating in this other discussion thread you speak of, afaik. The way you make it sound, there must be several areas where the DC gives 20-25%...so list some so I can go do my research.

Originally Posted by scottrempel

I was talking about NF2 mobos...and you are still wrong. So, get your facts straight!

I never said there were no gains. I said they were very minimal.
You said "You'll get 20-25% system performance gains, period. " Please note the "period".
Please show me where you get these amazing gains...I was not participating in this other discussion thread you speak of, afaik. The way you make it sound, there must be several areas where the DC gives 20-25%...so list some so I can go do my research.

I think he was trying to say that the 20-25% performance boost is only doable in non-real life benchmarks.

Which makes the entire point meaningless seeing as any normal person wouldn't make use of said performance boost.

Then please, point me to any link of any NF2 mobo that can use *all* 3 dimm slots for dual channel. I have never heard of any nf2 dc mobo being able to do this, which is why the dimms for dual channel come in different colors on these boards. My nf2 mobo certainly can not - and the manual clearly states it as well. If you can then I stand corrected but not refuted - as not all nf2 mobos can use all 3 dimms to dual channel.

As for the 20-25% performance, I don't want to do the research for you, it was a long time ago when I did mine. What I will do however is refer to this THG article from the nf2 era:

"The benchmark results prove that, with its Athon XP 2800+ plus the nForce2 chipset, AMD can take back the performance crown (Personal Addition: this was pitted up against P4's 2.8GHz flagship of the time). Above all, the CPU can take full advantage of the higher bandwidth of the nForce2 chipset with Dual DDR333. This offers a theoretical bandwidth of 6.4 GB/s (PC3200 x 2).

Furthermore, note that the Front Side Bus clock and memory clock now communicate synchronously. Here, we refer to our lab findings regarding the new 166 MHz FSB clock: when the currently fastest VIA KT333 chipset is used (KT400 is much slower than KT333!), the higher FSB clock results in an increase of just around 5% in the total performance. But it's a different story when Nvidia's nForce 2 enters the scene: here, the performance increases by 20% to 25%.

Nevertheless, the performance of Dual-Channel DDR333 is convincing because it brings system performance up to the level of a top P4 model."

http://www.tomshardware.com/cpu/2002...p_2800-23.html