**** FS: 2 Acura Keyfobs/Remotes ****

Selling 2 new key fobs/remotes for an Acura EL.
FCC ID: A269ZUA108
CANADA: 700 101 630

Price: One for $30, both for $50 obo
Shipping: Buyer pays for all shipping costs

I'm Toronto if anyone is interested in picking it up locally.

Email me at omyhead@hotmail.com if interested.

Here are some pics:
http://f1.pg.photos.yahoo.com/ph/omyhead/a...r=/f2e9&.src=ph

_________________________________________________
Transmitter Programming Instructions

Storing transmitter codes:
The codes of up to three transmitters can be programed into the keyless receiver unit memory. (If a fourth code is stored, the code which was input first will be erased.) NOTE: It is important to maintain the time limits between the steps. Make sure the door's, the hood, and the trunk are closed.
1. Turn the ignition switch ON (II).
2. Within 1 to 4 sec., push the transmitter lock or unlock button with the transmitter aimed at the receiver in the passenger's multiplex control unit.
3. Within 1 to 4 sec., turn the ignition switch OFF.
4. Within 1 to 4 sec., turn the ignition switch ON (II).
5. Within 1 to 4 sec., push the transmitter lock or unlock button with the transmitter aimed at the receiver in the passenger's multiplex control unit.
6. Within 1 to 4 sec., turn the ignition switch OFF.
7. Within 4 sec., turn the ignition switch ON (II).
8. Within 1 to 4 sec., push the transmitter lock or unlock button with the transmitter aimed at the receiver in the passenger's multiplex control unit.
9. Within 1 to 4 sec., turn the ignition switch OFF.
10. Within 4 sec., turn the ignition switch ON (II).
11. Within 1 to 4 sec., push the transmitter lock or unlock button with the transmitter aimed at the receiver in the passenger's multiplex control unit.
12. Confirm you can hear the sound of the door lock actuators. Within 1 to 4 sec., push the transmitter lock or unlock button again. The keyless receiver's now in the programming mode. You must push transmitter lock or unlock button of the first
tramsmitter again program that transmitter.
13. Within 10 sec., aim the transmitters (up to three) whose codes you want to store at the receiver, and press the transmitter lock or unlock buttons. Confirm that you can hear the sound of the door lock actuators after each transmitter code is stored.
14. Turn the ignition switch OFF, and pull out the key.
15. Confirm proper operation with the new codes(s).

Bump

sent pm