PDA

View Full Version : No Power to Plug


jonnyb
Jan 31st, 2009, 11:45 AM
Woke up this morning did my daily routine and everything was working fine in our master bath.

A few hours later I go back in and notice the clock is out. We have 2 outlets in the bathroom, one for each sink...non gfi. Thought it would be as simply as flipping the breaker on and off except nothing was tripped. I've since flipped every breaker in the house, minus anything 220v and my circuit tester still isn't showing anything on either plug.

Any ideas?

CSK'sMom
Jan 31st, 2009, 12:04 PM
Do you have a GFI plug anywhere else in the house? Often they are wired together with just the one GFI. If you do check it out and reset it...

l69norm
Jan 31st, 2009, 01:46 PM
Do you have a GFI plug anywhere else in the house? Often they are wired together with just the one GFI. If you do check it out and reset it...

+1, bathroom plugs are all wired together to one GFI. Check all the other bathrooms for a GFI and reset it

sunnybono
Jan 31st, 2009, 03:09 PM
+1, bathroom plugs are all wired together to one GFI. Check all the other bathrooms for a GFI and reset it

+1 Usually builders install 1 GFI attached to all bathrooms.

sk

jonnyb
Jan 31st, 2009, 04:41 PM
Everyone was right, the plugs were connected to the main floor bathroom GFI. I reset it and things are working fine now.