LuTech
Jun 16th, 2006, 06:40 PM
If I were to sell my car system, how much could I get for it? Here is what I have:
Power Amplifier 4 channel
Kenwood 1000W Maximum Power
Model: KAC-8101D
Cast Aluminum Heat Sink: with Sandblast Finish
Maximum Output Power: 1000 Watts
RMS Power Output at 2 Ohms: at 14.4V (100Hz, 0.5% THD): 400 Watts x 1
RMS Power Output at 4 Ohms,:at 14.4V (20Hz 200Hz, 0.5% THD): 200 Watts x 1
Selectable Infrasonic Filter: Off/15/25Hz, 18dB per Octave
Variable Low Pass Electronic Crossover: 50Hz-200Hz, 18dB per Octave
Bass Boost: Off/+12dB (90Hz)
Secondary Capacitors: 2 Large
MonoBlock Class D Operation
2-Ohm Stable
1 - 12" MTX Thunder 4500 Sub in Brand New Non-Ported Bass Worx Box
Impedance: 4OHMS
Frequency Respose: 30-150Hz
RMS Power 225
Rec RMS Amplifier Power: 112.5-225
Voice Coil: .15"
magnet Weight: 35
Sealed Enclosre Net Volume: 1.25ft 3
Speaker Displacement: .05ft 3
Tuning Frequency: 37Hz
Please give me some feed back to what this is worth, and depending on responses I may sell.
Thanks all!
Power Amplifier 4 channel
Kenwood 1000W Maximum Power
Model: KAC-8101D
Cast Aluminum Heat Sink: with Sandblast Finish
Maximum Output Power: 1000 Watts
RMS Power Output at 2 Ohms: at 14.4V (100Hz, 0.5% THD): 400 Watts x 1
RMS Power Output at 4 Ohms,:at 14.4V (20Hz 200Hz, 0.5% THD): 200 Watts x 1
Selectable Infrasonic Filter: Off/15/25Hz, 18dB per Octave
Variable Low Pass Electronic Crossover: 50Hz-200Hz, 18dB per Octave
Bass Boost: Off/+12dB (90Hz)
Secondary Capacitors: 2 Large
MonoBlock Class D Operation
2-Ohm Stable
1 - 12" MTX Thunder 4500 Sub in Brand New Non-Ported Bass Worx Box
Impedance: 4OHMS
Frequency Respose: 30-150Hz
RMS Power 225
Rec RMS Amplifier Power: 112.5-225
Voice Coil: .15"
magnet Weight: 35
Sealed Enclosre Net Volume: 1.25ft 3
Speaker Displacement: .05ft 3
Tuning Frequency: 37Hz
Please give me some feed back to what this is worth, and depending on responses I may sell.
Thanks all!