Civic SI 2006 wheel & tire question?

[Andro]

What are the specs (offset and complete wheels and tire specs) for 2006 civic SI? also would it be possible to fit wheels from 2006 accord into 2006 SI or do they have different bolt patterns, offsets? i was also thinking about this setup 235/40ZR/18 95W........possible or not?

P.S. i know both of these cars have 5 bolt designs but not sure about their bolt patterns offsets and such. thx for help in advance

[oldsnail]

5x114.3..
same with the previous civic SIR's.
same with RSX

[Andro]

i think accord's is also 5 X 114......so they are the same? basically i can swap wheels between these two?

[ericssonboi]

i think accord's is also 5 X 114......so they are the same? basically i can swap wheels between these two?

But the Accords don't come in 18's..

[Andro]

i know they don't......im just saying this setup: 235/40ZR/18 95W was on accord, wondering if i can transfer this to civic. That's why i need to know if they have same offsets, bolt patterns and so on.

[bluetroll]

why don't u just call honda?

[oldsnail]

accord has funky bolt patterns.

4cyl is 4x114.3
6cyl is 5x114.3

[belgiangenius]

What are the specs (offset and complete wheels and tire specs) for 2006 civic SI? also would it be possible to fit wheels from 2006 accord into 2006 SI or do they have different bolt patterns, offsets? i was also thinking about this setup 235/40ZR/18 95W........possible or not?

P.S. i know both of these cars have 5 bolt designs but not sure about their bolt patterns offsets and such. thx for help in advance

But, why would you buy that butt ugly car?

Just get an RSX.

[Andro]

1. honda doesn't know anything about this, all they know is that stock honda wheels fit........they are stupid i called them before.

2. it's a 6cyl, V6

3. actually the reason i don't get RSX is because it is but ugly, the worst shape i'v ever seen, integra type R was good but RSX is way beyong ugly.........civic is the one i like......plus the question was about the tire and wheel size that i can fit in, not why i don't buy RSX, so let's stay on the topic here.

[Kenneth]

You speedo will be off by 3-4% (too fast); which is reasonable. I'm assuming the 235/40/18 are factory Honda/Acura wheels: in which case the offset should be ok but the tires are quite wide and fill up the fender of the Accord/TL/TSX already. On a Civic it might look a little odd (given the smaller wheel well and smaller brakes) or worse yet the tires might rub the inner fender when you turn.

It'll bolt up fine; but you'll need a trial fit to make sure. Why do you need W rated tires on a civic though? No way your gonna reach 270 clicks/hr unless you drop the car out of a plane :lol: .

[Andro]

it's not honda wheels.......they don't make them that big......it's aftermarket enkei RPM2 and i had them on my accord with no problems whatsoever even lowered.......im just wondering if anyone knows for sure if these specs are ok for civic too

[googoo]

"But, why would you buy that butt ugly car?

Just get an RSX."

Is it me or is this reply not at all helpful?

Brent

[Narci]

http://www.discountedwheelwarehouse.com/Honda___Vehicle_Bolt_Pattern_Reference.cfm

[actng]

what matters more is the offset and the width of the wheel. check the owner's manual for details.

[Narci]

And the centre bore.

[climacus]

I think 235/40/18 will have rubbing issues. Not to mention it's expensive, attracts too much attention from the wrong crowd, and f-ck up your handling. The stock suspension is a joke on the 2006 Civic Si. You should keep the stock rims, replace the crap OEM tires and put the money into better springs and shocks.