PDA

View Full Version : Hello.... I am Blaster18 and HomieG


hyper_threading
Jul 21st, 2005, 10:13 PM
MotherBoard Specifications :
Processor - Socket 478 for Intel Pentium 4 ( Northwood) 3.34Ghz On-die 512/256KB L2 Cache with full speed.

Chipset - North Bridge: Intel 845GL / South Bridge: Intel ICH4

Front Side Bus - 400 MHz

Memory - 2 x 184-pin DIMM Sockets support max. 2GB PC2100 / PC1600 non-ECC DDR SDRAM memory Currently Installed 512Mb Ram

Expansion Slots - 3 x PCI

VGA - Chipset Integrated Intel 865GL

IDE - 2 x UltraDMA 100 / 66 / 33

Audio - RealTek 2 ch Codec

LAN (optional) - RealTek 8101 LAN

Special Features - Power Loss Restart
ASUS JumperFree
CPU Throttle
STR (Suspend to RAM)

Back Panel - I/O 1 x Parallel
1 x Serial
1 x PS/2 Keyboard
1 x PS/2 Mouse
1 x VGA
1 x Audio I/O
1 x RJ-45 (optional)
4 x USB 2.0 + 2 optional

Internal I/O Connectors - -1 x USB 2.0 header supports additional 2xUSB 2.0 port
-CPU / Chassis FAN connectors
-20 pin ATX Power connector
-power LED connetor
-Chassis Intrusion,SIR
-CD / AUX audio in
-Front Panel Audio connector

BIOS - 2Mb Flash ROM, AwardR BIOS, TCAV, PnP, DMI2.0, WfM2.0, SM BIOS 2.3

Industrial Standard - PCI 2.2, USB 2.0

http://www.asus.com/products/mb/socket478/p4bgl-mx/p4bgl-mx_l.jpg

Comes With Pentium 4 Processor 3.34Ghz With CPU Heat Sink Fan + 40Gb Hdd + 20Gb Hdd + 512Ram + Cd Burner 52x32x52 + Floppy Drive + IDE Cables + 500W Power Supply.. Prety Much Everything thing you need to make it work...


Samsung 715V LCD Monitor Specifications:


Viewable Image Size: 17"
Brightness (Typical): 290 cd/m2
Contrast Ratio: 500:1
Viewing Angle (H/V): 150/120 degrees
Interface: Analog
Horiz. Frequency: 30-60
Max/Native Resolution: 1280x1024
Emissions Standard: TCO '95
Special Features: MagicTuneTM, Built-in power, MagicBrightTM.

Monitor Only Used For aprox. 2Months, New Mint Condition, No Dead Pixles.
http://www.monitoroutlet.com/images/products/large/476545.jpg

+
Scaner I do not have the specifacations with me right now but it is not even out of the wraper Yet, Still in the box, Brand New.. Selling For 50$ Obviously It's in mint Condition because it not even opened


Lexmark E232 Laser Printer Specifications

Print Speed: 22 ppm Black
Resolution: 600 x 600 dpi
First page out in 8.5 seconds
Paper Handling: 250 Sheet Paper Capacity Consists of:
1 x 250 Sheet Input Tray
Features: Low Toner Indicator, Toner Saver Mode
Memory: 16 MB (80 MB max)
Connectivity: Parallel and USB
Environments: PC and Mac Compatible

New Printer Used Only About 20 Times And For aprox. 2 Months, As the Lcd Monitor Purchased at the same time. MINT CONDITION. Full Ink..


http://www.pcplus.co.uk/media/pcplus/lexmarke232fee.jpg

Asking Price

I'm was Asking 1000$ For Everything.XX Now Asking 600$
Part Out Prices : Computer 500$ LCD 200$[Sold] Printer 150$ Scaner 50$

Or Best offer on EVERYTHING!! <---- Just Offer

I Am Located In Ottawa, Ontario, Canada. Perfered Local Buyer, But I will Ship. Must say Everything That I am selling was/is Handled with the best of care and Everything is kept in MINT CONDITION.. If you are Intrested or Have Any Question. Please E-Mail Me at Hyper_Threading@Rogers.com





Payments Accepted:
Cash
Personal Cheque
Money Order/Cashiers cheque
Paypal
Western Union Money Transfer



STATS
Computer - For Sale
LCD - SOLD
Scaner - For Sale
Printer - For Sale

hyper_threading
Jul 22nd, 2005, 04:12 PM
Bump

NODES
Jul 22nd, 2005, 04:16 PM
you should state the Brands of each item in that pc, would help potential buyers out

hyper_threading
Jul 22nd, 2005, 08:07 PM
Bump

hyper_threading
Jul 23rd, 2005, 12:31 PM
bump

hyper_threading
Jul 23rd, 2005, 02:07 PM
BUMP Computer 600 OBO

hyper_threading
Jul 23rd, 2005, 02:58 PM
Monitor Sold!!!

wookie
Jul 23rd, 2005, 03:31 PM
whats price for just laser? still have original receipt/packaging?

hyper_threading
Jul 23rd, 2005, 03:38 PM
Laser Printer is 150$ I might have the box and reciept if my brother hasent throwen that stuff out becuase the reciept was on the box but ill check for it..

hyper_threading
Jul 24th, 2005, 01:14 AM
Memory now upgraded the computer to 512mb sorry about that. i was going to keep some of the memory but people have told me that 256mb is to low for it to sell.

NODES
Jul 24th, 2005, 01:52 AM
cant remember a p4 3.34ghz cpu...whats the stepping on that?

VGA - Chipset Integrated Intel 865GL <--- Since the chipset is 845 then video should be 845gl

hyper_threading
Jul 24th, 2005, 05:57 AM
bump

hyper_threading
Jul 24th, 2005, 05:37 PM
bump

hyper_threading
Jul 24th, 2005, 06:17 PM
I think its a 3.2Ghz CPU but i put it in and it was 3.34Ghz.. not too sure all i know is that i wanna get rid of it asap need money to get my car fixed!!

hyper_threading
Jul 26th, 2005, 11:11 AM
BUMP


Best offer on everything will part out on pc if mobo and cpu are bought

hyper_threading
Jul 26th, 2005, 05:40 PM
bump

bug
Jul 26th, 2005, 06:04 PM
I believe you need to put a price for the PC, unless its a trade.

hyper_threading
Jul 26th, 2005, 06:58 PM
ANYONE INTRESTED?? Im LOCATED IN OTTAWA, ONTARIO

LEXMARK E232 Printer + Computer + scaner!!

BEST OFFER ON EVERYTHING, Everything has to sell!!!

E-Mail me at Hyper_Threading@Rogers.com
thanks alot!

hyper_threading
Jul 26th, 2005, 07:03 PM
Asking Price

I'm was Asking 1000$ For Everything.XX Now Asking 500$
Part Out Prices : Computer 500$ LCD 200$[Sold] Printer 150$ Scaner 50$

Or Best offer on EVERYTHING!! <---- Just Offer






the price is right here!!! and it was there the whole time!! Or BEST OFFER!!!

XblueX
Jul 27th, 2005, 01:09 PM
Bump