CTC: special buys this wk (*06/09 - 06/15*)

[mahjongmaniac]

starting this wk on THURSDAY, 06/09/05, CTC ( = Canadian Tire CorporatioN) is selling some special buy / hot items ...

some of hot items i found were:

CTC($5): "Advent" Universal Remote Control 4 device (http://www.canadiantire.ca/assortments/product_detail.jsp?FOLDER%3C%3Efolder_id=140847439 6669724&ASSORTMENT%3C%3East_id=1408474396670271&bmUID=1118401434395&PRODUCT%3C%3Eprd_id=845524443281817&assortment=primary&fromSearch=true) (for use with TV, VCR/DVD, SAT, AUX)

can't go wrong w/ a universal remote for only $5... ;)

CTC($12): Jobmate 36-piece Rotary Tool Kit (http://www.canadiantire.ca/assortments/product_detail.jsp?FOLDER%3C%3Efolder_id=140847439 6669843&PRODUCT%3C%3Eprd_id=845524443281685&ASSORTMENT%3C%3East_id=1408474396670271&bmUID=1118401788742&assortment=primary&fromSearch=true)

reg. $30


CTC($17.50): Mastercraft 25-piece Screwdriver Set (http://www.canadiantire.ca/assortments/product_detail.jsp?FOLDER%3C%3Efolder_id=140847439 6669765&PRODUCT%3C%3Eprd_id=845524441898371&ASSORTMENT%3C%3East_id=1408474396670271&bmUID=1118401852960&assortment=primary&fromSearch=true) (rubber grip set)

reg. $50


CTC($10): 3-piece Automotive Kit (http://www.canadiantire.ca/assortments/product_detail.jsp?FOLDER%3C%3Efolder_id=140847439 6669499&PRODUCT%3C%3Eprd_id=845524443281587&ASSORTMENT%3C%3East_id=1408474396670271&bmUID=1118402037706&assortment=primary&fromSearch=true) (includes multi-tool, digital tire gauge, and flashlight.

reg. $40

this is kinda pretty cheap ... the digital tire gauge itself is prbly worth $10...


CTC($10): Spinning Combo 6' rod and spoon (http://www.canadiantire.ca/assortments/product_detail.jsp?FOLDER%3C%3Efolder_id=140847439 6669605&PRODUCT%3C%3Eprd_id=845524443267129&ASSORTMENT%3C%3East_id=1408474396670271&bmUID=1118402108146&assortment=primary&fromSearch=true) (for fishers)

Reg. $40.


EDIT: oops, i 4got to mention that the last 2 items stated above need teh coupons u get from the GAS bar.... else, u'd need to pay'em at full price.

-----------------------

if any1 can find more special buys from CTC, feel free to post'em up here



and FYI, u may wanna combine these deals if ur planning to purchase something big at CTC... thread here (http://www.canadiantire.ca/assortments/product_detail.jsp?FOLDER%3C%3Efolder_id=140847439 6669605&PRODUCT%3C%3Eprd_id=845524443267129&ASSORTMENT%3C%3East_id=1408474396670271&bmUID=1118402108146&assortment=primary&fromSearch=true)


------------------------------------------------------------------------

EDIT 06/14/05: free shipping for everyone! :cheesygri

thx to values99club for the original thread post:


Free Shipping @CDN Tire until June 21, 2005, promo code POOLS324 (http://forums.redflagdeals.com/showthread.php?t=170023)

[weilyan]

from my experience with ctc, the 2 items with the gas coupon, you dont really need the coupon if you purchase those items within the week of the flyer.

Secondly, I'd stay away from Jobmate, that brand really sucked...i bought 2 things from Jobmate. First a mecanics set of sockets and ratchet and the ratchet broke on my first turn. Another time i bought a vice-grip from Jobmate, the metal got stripped, it broke and the job wasn't even done.

[jimbarric]

from my experience with ctc, the 2 items with the gas coupon, you dont really need the coupon if you purchase those items within the week of the flyer.

Secondly, I'd stay away from Jobmate, that brand really sucked...i bought 2 things from Jobmate. First a mecanics set of sockets and ratchet and the ratchet broke on my first turn. Another time i bought a vice-grip from Jobmate, the metal got stripped, it broke and the job wasn't even done.

Jobmate tools are low-end, but very inexpensive compared to others. You do take on a risk with any low-end product you buy, but in the cost-quality trade-off, I've been happy with my Jobmate products. If I were rich, I'd avoid these like the plague, but since I'm not, I'm happy to use them. Just my opinion.

[Marc]

Thanks, and posted!

[cannon_fodder]

Thank you!!! We need to get some cheapo rod/reels for the kiddies. Perfect timing!

[southnam]

I also saw the Coleman 10 X12 tent for $99. Reg $199. The these tents IMO are better than the other CT sells

[Max_Dealing]

Is there a free shipping coupon?

RFD search is not working for me. "Fatal error: Allowed memory size of 16777216 bytes exhausted (tried to allocate 1024 bytes) in /var/sites/redflagdeals.com/forums/html/forum/search.php on line 839"

[mahjongmaniac]

from my experience with ctc, the 2 items with the gas coupon, you dont really need the coupon if you purchase those items within the week of the flyer.


actually, i think it depends...

i remember some time ago i went in to buy something and the price scanned at the REGULAR price... and they said i had to have the physical coupon in order to get the discount... :mad:

went to the gas bar 2 min away and came back to get the price adjustment....... and oddly enuff the cashier just MANUALLY entered the price for the item; no scanning of coupon, entering coupon code, whatsoever...

kinda "gay" that u have to do that, but it IS part of a marketing strategy to get u to buy gas from CT FIRST, and then get the coupons.... (but usually i just ask the gas bar tender to give'em to me as they don't really care... :D )

------------------------------------------------

Is there a free shipping coupon?

RFD search is not working for me. "Fatal error: Allowed memory size of 16777216 bytes exhausted (tried to allocate 1024 bytes) in /var/sites/redflagdeals.com/forums/html/forum/search.php on line 839"

checked the coupons section and couldn't find any free s/h coupon...

i believe there WAS one a few wks ago, but i guess it expired already....

anyways, FYI, for those that plan to buy $250+ of items this wk, here's the coupon for a $25 GC:

Free $25 GC
Use coupon code GIFTCARD on purchases of $250 or more and receive a free $25 Canadian Tire gift card.
Exp: 12/31/05

[nicolaim]

70% off 11-Pocket Leather Toolbelt $9

70% off Mastercraft Maximum EasyChange Tool Set $30
http://www.canadiantire.ca/assortments/product_detail.jsp?FOLDER%3C%3Efolder_id=140847439 6669774&PRODUCT%3C%3Eprd_id=845524443277130&ASSORTMENT%3C%3East_id=1408474395438793&bmUID=1118434119506&assortment=primary&fromSearch=true

65% off Mastercraft Heat Gun Kit:
http://www.canadiantire.ca/assortments/product_detail.jsp?FOLDER%3C%3Efolder_id=140847439 6669747&PRODUCT%3C%3Eprd_id=845524442952791&ASSORTMENT%3C%3East_id=1408474395438793&bmUID=1118432908767&assortment=primary&fromSearch=true

65% off folding work table $14

60% off Mastercraft Maximum 26-piece 1/4-in. Router Bit Set $100
http://www.canadiantire.ca/assortments/product_detail.jsp?FOLDER%3C%3Efolder_id=140847439 6669828&PRODUCT%3C%3Eprd_id=845524443249345&ASSORTMENT%3C%3East_id=1408474395438793&bmUID=1118433016236&assortment=primary&fromSearch=true

60% off:
Jobmate 8¼-in. Table Saw $40
Jobmate 4-Piece Combo & Level Set $8
Many Lufkin tape measures
Jobmate 3-piece Aviation Tin Snips Set $8
Mastercraft 8-in. Mini Bolt Cutter $7
Mastercraft Bolt Cutters $8.50 and up
Mastercraft Swivel Riveter $15
Mastercraft 80-piece Riveter Kit $8
Riveter Set $6
Mastercraft 8 and 14-in. Pipe Wrench Set $10
Mastercraft Aluminum Pipe Wrench $15
Mastercraft Maximum EasyChange Tool Set Add-On $24

1/2 price:
Mastercraft Workbench $70
Waterloo 5-Drawer DIY Tool Centre (tool chest) $80
Mastercraft Tradesman Aluminum Levels $8.50 and up
Mastercraft 12-in. Magnetic Level $9
Mastercraft Cast-Aluminum Levels $16.50 and up
Mastercraft Magnetic Aluminum Levels $12.50 and up
Folding Plastic Sawhorse $12.50
Mastercraft Sure Shot Light-Duty Staple Gun $10
Mastercraft Stud Sensor $8
Jobmate Laser Level $15
35-piece Angle Grinder Accessory Kit $35
Mastercraft 6-piece Hole Saw Set $25
16-piece Bi-Metal Hole Saw Set $75
5-piece Auger Bit Set $25
Mastercraft Maximum Dado Blade $100
Mastercraft Wet Tile Saw $75
Heavy-Duty Workstation (table saw stand) $20
8-piece Bench Grinder Accessory Kit $35
Mastercraft Maximum Stainless-Steel Magnetic Tray $9
Magnetic Tray $6
Mastercraft Maximum 7-piece Gear Wrench Set $45 and up
Mastercraft Maximum 7-piece Stubby Gear Wrench Set $40 and up
Jobmate 172-piece Toolset $50
Mastercraft Maximum 109-piece Socket Set $100
Maasdam Cable Puller $30
CanLift Chain Hoist $80 and up
Various drill bit sets
Fiskars LED headlamp $12.49

1/2 price Mastercraft 170-piece Rotary Tool Accessory Set $25:
http://www.canadiantire.ca/assortments/product_detail.jsp?FOLDER%3C%3Efolder_id=140847439 6669769&PRODUCT%3C%3Eprd_id=845524443248026&ASSORTMENT%3C%3East_id=1408474395438793&bmUID=1118432816194&assortment=primary&fromSearch=true

45% of Mastercraft 100-Piece Hammer Drill Kit $110
http://www.canadiantire.ca/assortments/product_detail.jsp?FOLDER%3C%3Efolder_id=140847439 6669837&PRODUCT%3C%3Eprd_id=845524443255808&ASSORTMENT%3C%3East_id=1408474396670271&bmUID=1118432437535&assortment=primary&fromSearch=true

40% off:
some electric nailers
Campbell Hausfeld 1/3-hp, 3-gallon Electric Air Compressor $90
Mastercraft Stick Welder $100
Mastercraft 28-piece Crank Speed Ratchet set $35

40% off Mastercraft Deluxe Router Table
http://www.canadiantire.ca/assortments/product_detail.jsp?FOLDER%3C%3Efolder_id=140847439 6669885&PRODUCT%3C%3Eprd_id=845524441897055&ASSORTMENT%3C%3East_id=1408474395438793&bmUID=1118433016245&assortment=primary&fromSearch=true

40% off Mastercraft Maximum Router Table $150
http://www.canadiantire.ca/assortments/product_detail.jsp?FOLDER%3C%3Efolder_id=140847439 6669885&PRODUCT%3C%3Eprd_id=845524443119531&ASSORTMENT%3C%3East_id=1408474395438793&bmUID=1118433016227&assortment=primary&fromSearch=true

25% off Timex watches

[mahjongmaniac]

70% off 11-Pocket Leather Toolbelt $9

70% off Mastercraft Maximum EasyChange Tool Set $30
http://www.canadiantire.ca/assortments/product_detail.jsp?FOLDER%3C%3Efolder_id=140847439 6669774&PRODUCT%3C%3Eprd_id=845524443277130&ASSORTMENT%3C%3East_id=1408474395438793&bmUID=1118434119506&assortment=primary&fromSearch=true

65% off Mastercraft Heat Gun Kit:
http://www.canadiantire.ca/assortments/product_detail.jsp?FOLDER%3C%3Efolder_id=140847439 6669747&PRODUCT%3C%3Eprd_id=845524442952791&ASSORTMENT%3C%3East_id=1408474395438793&bmUID=1118432908767&assortment=primary&fromSearch=true

65% off folding work table $14

60% off Mastercraft Maximum 26-piece 1/4-in. Router Bit Set $100
http://www.canadiantire.ca/assortments/product_detail.jsp?FOLDER%3C%3Efolder_id=140847439 6669828&PRODUCT%3C%3Eprd_id=845524443249345&ASSORTMENT%3C%3East_id=1408474395438793&bmUID=1118433016236&assortment=primary&fromSearch=true

60% off:
Jobmate 8¼-in. Table Saw $40
Jobmate 4-Piece Combo & Level Set $8
Many Lufkin tape measures
Jobmate 3-piece Aviation Tin Snips Set $8
Mastercraft 8-in. Mini Bolt Cutter $7
Mastercraft Bolt Cutters $8.50 and up
Mastercraft Swivel Riveter $15
Mastercraft 80-piece Riveter Kit $8
Riveter Set $6
Mastercraft 8 and 14-in. Pipe Wrench Set $10
Mastercraft Aluminum Pipe Wrench $15
Mastercraft Maximum EasyChange Tool Set Add-On $24

1/2 price:
Mastercraft Workbench $70
Waterloo 5-Drawer DIY Tool Centre (tool chest) $80
Mastercraft Tradesman Aluminum Levels $8.50 and up
Mastercraft 12-in. Magnetic Level $9
Mastercraft Cast-Aluminum Levels $16.50 and up
Mastercraft Magnetic Aluminum Levels $12.50 and up
Folding Plastic Sawhorse $12.50
Mastercraft Sure Shot Light-Duty Staple Gun $10
Mastercraft Stud Sensor $8
Jobmate Laser Level $15
35-piece Angle Grinder Accessory Kit $35
Mastercraft 6-piece Hole Saw Set $25
16-piece Bi-Metal Hole Saw Set $75
5-piece Auger Bit Set $25
Mastercraft Maximum Dado Blade $100
Mastercraft Wet Tile Saw $75
Heavy-Duty Workstation (table saw stand) $20
8-piece Bench Grinder Accessory Kit $35
Mastercraft Maximum Stainless-Steel Magnetic Tray $9
Magnetic Tray $6
Mastercraft Maximum 7-piece Gear Wrench Set $45 and up
Mastercraft Maximum 7-piece Stubby Gear Wrench Set $40 and up
Jobmate 172-piece Toolset $50
Mastercraft Maximum 109-piece Socket Set $100
Maasdam Cable Puller $30
CanLift Chain Hoist $80 and up
Various drill bit sets
Fiskars LED headlamp $12.49

1/2 price Mastercraft 170-piece Rotary Tool Accessory Set $25:
http://www.canadiantire.ca/assortments/product_detail.jsp?FOLDER%3C%3Efolder_id=140847439 6669769&PRODUCT%3C%3Eprd_id=845524443248026&ASSORTMENT%3C%3East_id=1408474395438793&bmUID=1118432816194&assortment=primary&fromSearch=true

45% of Mastercraft 100-Piece Hammer Drill Kit $110
http://www.canadiantire.ca/assortments/product_detail.jsp?FOLDER%3C%3Efolder_id=140847439 6669837&PRODUCT%3C%3Eprd_id=845524443255808&ASSORTMENT%3C%3East_id=1408474396670271&bmUID=1118432437535&assortment=primary&fromSearch=true

40% off:
some electric nailers
Campbell Hausfeld 1/3-hp, 3-gallon Electric Air Compressor $90
Mastercraft Stick Welder $100
Mastercraft 28-piece Crank Speed Ratchet set $35

40% off Mastercraft Deluxe Router Table
http://www.canadiantire.ca/assortments/product_detail.jsp?FOLDER%3C%3Efolder_id=140847439 6669885&PRODUCT%3C%3Eprd_id=845524441897055&ASSORTMENT%3C%3East_id=1408474395438793&bmUID=1118433016245&assortment=primary&fromSearch=true

40% off Mastercraft Maximum Router Table $150
http://www.canadiantire.ca/assortments/product_detail.jsp?FOLDER%3C%3Efolder_id=140847439 6669885&PRODUCT%3C%3Eprd_id=845524443119531&ASSORTMENT%3C%3East_id=1408474395438793&bmUID=1118433016227&assortment=primary&fromSearch=true

25% off Timex watches


wow... thx for posting all those good deals...


odd that u created yet another thread on CTC deals... :confused:

(i also noted that other RFDers have also posted other CTC deals)

[Mystix]

why not just say CT? CTC is so much more confusing

[mahjongmaniac]

why not just say CT? CTC is so much more confusing

actually, i dunno... just saw others saying CTC instead of CT, so i just post CTC...

doesn't really matter as long as every1 knows what "CTC" stands for...;)

[Captain Toonces]

I also noticed they have an all new 10" compound mitre saw (http://www.canadiantire.ca/assortments/product_detail.jsp?FOLDER%3C%3Efolder_id=140847439 6669852&ASSORTMENT%3C%3East_id=1408474396670271&bmUID=1118496152257&PRODUCT%3C%3Eprd_id=845524443281501&assortment=primary&fromSearch=true) for $149.99 ($50 off). 3 Year Warranty. Looks a lot nicer than their old one and a good value. The similar model sold at Sears goes on sale for $199 or so usually.

[cannon_fodder]

actually, i think it depends...

i remember some time ago i went in to buy something and the price scanned at the REGULAR price... and they said i had to have the physical coupon in order to get the discount... :mad:

went to the gas bar 2 min away and came back to get the price adjustment....... and oddly enuff the cashier just MANUALLY entered the price for the item; no scanning of coupon, entering coupon code, whatsoever...

kinda "gay" that u have to do that, but it IS part of a marketing strategy to get u to buy gas from CT FIRST, and then get the coupons.... (but usually i just ask the gas bar tender to give'em to me as they don't really care... :D )
I went to the gas bar yesterday (didn't buy gas) and the guy gave me a coupon no questions asked. I got the impression that it happens all the time.

I went into the store and they scanned the price of the fishing rod and it came up at the 75% off price so I didn't have to show the cashier the coupon. Interestingly, they had the "gas bar purchase" coupons for the previous two weeks right by the cash. Thus, you could go in next week and grab this weeks coupon without heading to the gas bar it appears.

[fbrm]

I also saw the Coleman 10 X12 tent for $99. Reg $199. The these tents IMO are better than the other CT sells


Can anyone post a pic or link to this tent?

Thanks

fbrm

[mahjongmaniac]

I went to the gas bar yesterday (didn't buy gas) and the guy gave me a coupon no questions asked. I got the impression that it happens all the time.

I went into the store and they scanned the price of the fishing rod and it came up at the 75% off price so I didn't have to show the cashier the coupon. Interestingly, they had the "gas bar purchase" coupons for the previous two weeks right by the cash. Thus, you could go in next week and grab this weeks coupon without heading to the gas bar it appears.

:confused:

hm... maybe it depends on location or somethin cuz their system didn't have the "updated price" on the item i bought... so thus i had to show'em the coupon and THEN would the cashier manually give me the discount. :confused:

btw, my local CT does NOT have coupons that u can take right from the cashier desk...

not saying that its a "big deal" to walk across to the CT gas bar that's 2 mins away, but its just that IMO its kinda dumb...

and yes, sometimes the cashier at the gas bar will give u the coupons no prblm cuz they don't care. ;)

[stemfi]

Since there is no gas station at the Eglinton/Laird Store they allow you to buy without the gas station coupon.

[Chinko]

actually, i dunno... just saw others saying CTC instead of CT, so i just post CTC...

doesn't really matter as long as every1 knows what "CTC" stands for...;)


hehe, but CT is way better, because no one says Canadian Tires Coporation anyway :)

[toolman11]

I went and bought the $12 Jobmate rotary tool. This will be my first experience with Jobmate products. For small sanding, polishing jobs it can't be that bad a product.

[cliff]

the 10" buffer is a pretty decent deal:
Product# 39-9019-4
View larger image
Reg. $49.99 Sale $29.99
http://images.canadiantire.ca/media/images/Automotive/CarCleanUp/Polishers/0399019_160_CC_3280.jpg

[felix]

Any tool kits on special that come with a dremmel? I am looking for one since I found out it's needed for modding computers. But I have no idea how to use one. :|

[Groove]

I also saw the Coleman 10 X12 tent for $99. Reg $199. The these tents IMO are better than the other CT sells

is this deal online or in-store only? i cant seem to find anything along those lines... was it one of the Sundomes?

99 bucks is a pretty sweet deal for a 10x12 tent

[spudz2000]

I picked up one today also. For $12 you can't beat it. The clerk we found the pile of them for me told me to hang onto the receipt because they have a 1yr replacement warranty included if you have any problems. So now the deal is even hotter I think. I picked up the mastercraft 160pc rotary tool acc. kit as well that was on for 50% off from $49.99. So for a total of $37+taxes it's a sweet setup I think. A comparable dremel is better but costs $125 with the 160pcs included.

I went and bought the $12 Jobmate rotary tool. This will be my first experience with Jobmate products. For small sanding, polishing jobs it can't be that bad a product.

[nicolaim]

Any tool kits on special that come with a dremmel? I am looking for one since I found out it's needed for modding computers. But I have no idea how to use one. :|

Rotary tool = Dremel. Jobmate rotary tool $12.

[Before I get flamed here, I'm not saying the Jobmate is as good as a Dremel.]

[teddy boom]

I picked up the Jobmate dremel... It seems to be a lot like a dremel. Same weight, very similar specs, pretty much the same injection moldings...

For $12 it is super hot!

(some left at Young & Bloor Monday afternoon)

[mrken]

What drill bits does the Jobmate rotary tool come with? I would like to drill some holes in PCBs at home when I forget one or two holes at school. Hopefully my hand will be steady enough so that I don't need a stand. :D

Would I have to buy the Mastercraft accessory kit for the small drill bits? I would like something around 30 mils.

[mahjongmaniac]

now that there's a free shipping code, we can all be LAZY and order onine! :D

thx to values99club for the original thread post:


Free Shipping @CDN Tire until June 21, 2005, promo code POOLS324 (http://forums.redflagdeals.com/showthread.php?t=170023)

[Captain Toonces]

What drill bits does the Jobmate rotary tool come with? I would like to drill some holes in PCBs at home when I forget one or two holes at school. Hopefully my hand will be steady enough so that I don't need a stand. :D

Would I have to buy the Mastercraft accessory kit for the small drill bits? I would like something around 30 mils.

Hi, correct me if I am wrong but isn't 30 mils less than a millimeter? I don't think you will find what you are looking for in either of those rotary tool assortments. Not sure, but I think the only drill bits that are included are the ones that will actually fit in the collets (1/8" or 3/32" are the only ones I have, a rotary tool doesn't have an adjustable chuck like a drill it use a specific diameter collet like a router does).

maybe you would need something like this.. (http://www.michtoy.com/MTSCnewSite/supplies_folder/cutting_drilling/drills/60301.html)

[mrken]

Hi, correct me if I am wrong but isn't 30 mils less than a millimeter? I don't think you will find what you are looking for in either of those rotary tool assortments. Not sure, but I think the only drill bits that are included are the ones that will actually fit in the collets (1/8" or 3/32" are the only ones I have, a rotary tool doesn't have an adjustable chuck like a drill it use a specific diameter collet like a router does).

maybe you would need something like this.. (http://www.michtoy.com/MTSCnewSite/supplies_folder/cutting_drilling/drills/60301.html)
Yes, 30 mils (0.03 inches) is under a millimetre.

Thanks for the information. My school has quite a few Dremel drills (not the clones, but the actual Dremel brand) that we use to drill PCBs. I know that those have a toolless adjustable chuck for inserting and removing drill bits, just like a cordless drill.

So these rotary tools have a fixed receptable like those hexagons for screwdriver bits?

[teddy boom]

Well, these Lee Valley bits (http://www.leevalley.com/wood/page.aspx?c=1&p=31007&cat=1,130,43409) are the real thing, I'm not sure what I think about "resharpened"...

I wouldn't be able to drill it without the stand, but I guess it is worth a try.

edit: doh!

[Captain Toonces]

So these rotary tools have a fixed receptable like those hexagons for screwdriver bits?

No, not a fixed receptable like those hexagon screwdriver bits. They usually come standard with a 1/8" collet that will accept only round bits of the specified collet diamater. The collet is placed in the tool and then the bit slides into the collet and then a chuck cap is tightened on top to wrench tight the collet on to the bit (it is more secure than an adjustable chuck).

I am guessing that your school uses a chuck adapter similar to this one HERE (http://www.amazon.com/exec/obidos/tg/detail/-/B0000302ZV/ref=pd_sxp_f/102-7701144-8713767?v=glance&s=hi) I don't know if they sell those adapters at Canadian Tire but if so you would have to make a separate purchase (won't be included in an accessory kit).

[mrken]

Thanks for all of the information. :) The drill at school seemed to use the adapter that Captain Toonces linked to at Amazon.

As for the lee valley bits.... Over 50 cents for a resharpened drill.... :(

Okay, I am abandoning all my plans. :) Thanks for everything! :mad: :razz:

[BBucKK]

I picked up 4 of the fishing rods - great price at $9.99. They were in the store in a bin marked 75% off - no gas bar coupon need. This was at the Orleans, ON location


Cheers
BBucKK